GENUINE Siemens Deka 630CC 60lb Injectors SHORT FI114962 107-962 107962 (6)

Product Description

60lb/h Siemens Deka High Impedance (Short Style) with EV1 Connector – FI114962 (37.5mm)

Genuine Siemens / Mototron DEKA IV High Impedance Injectors

Ultra-Compact, high flow injector at just 37.5mm end to end! These injectors flow 60 lbs/hr at 43.5 PSI ( 3 BAR ) and up to 85 lbs/hr at 87 PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.

These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.

Engine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors “pencil stream” high flow injectors; these High Flow injectors utilize a multi-orifice tip providing a true 30 degree spray pattern for improved mixture preparation. This results in lower BSFC and better idle quality than many injectors with less flow.

Features:
 Genuine, reliable Siemens Injectors
 Excellent response characteristics
 Robust Design
 High Impedance
 Low Impedance performance characteristics with High Impedance Compatibility

Specifications:
 Coil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required)
 Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 60 lb/hr = 630 cc/min = 453 g/min
 Static Flow Rate @ 87PSI ( 600kPa ) w/Gas: 85.7 lb/hr = 900 cc/min = 648 g/min
 Gain: 0.11ms/mg
 Offset: 0.055ms
 Turn on time @ 14VDC: 1.14ms
 Turn off time: 0.85ms @ 600KPa
 Connector: Minitimer EV1
 Series: DEKA 4 ( DEKA IV )
 Orifice Type: Multi-orifice
 Spray Pattern: 30 Degree Spray Cone
 Factory fitted with Viton upper and lower o-rings 37.5mm end to end

Equivalent Part Numbers:
Siemens FI114962 or 107-962 ( 107962 )
Mototron INJ-GAS-002 ( S107)